|
|
|
ROHS
|
|
|
Advanced Power Technology
The package external leads will be full comliance to RoHs 95 no later than July 2006.
SOT-227 (isotop)-ok. Other Products comliant by beginning of Q1-05.
TO-247, T-Max, TO-264, TO-264-Max, all hermetic products - primary leadfree finish will be 96.5Sn/3.5Ag/0.5Cu (tin-silver-copper), or SAC.
TO-220 and D3 products - Pure annealed matte-tin lead-free terminal finish.
All prod available in standard Pb terminal finish until the transition period is completed.
|
|
|
|
|
|
Caddock
|
|
|
|
|
|
Coronis systems
Transceivers compliant by September 1 st. 2005
|
|
|
|
|
|
Gaia
The production of RoHS compliant products will start January 1 st 2006 for all Gaia Converter products from all families.
|
|
|
|
|
|
Grayhill
All parts will be available from Q3 2005
|
T-suffix at the end of the part no.
|
|
|
|
|
|
Lascar
No ROHS Document, but expected to be fully compliant by July 2006.
|
No change
|
|
|
|
|
|
Melexis
MLX90240CPA:
TH7122ELQ: Leadfree now
TH71081EDC: Leadfree now.
2SA10 50v/t: Will not be leadfree
MLX10801: Leadfree now.
MLX90308LDF-D (SOIC16w package) Leadfree now (since Q2/05)
Ask for each part specifically
|
No change except leadfree symbol on packing/shipping containers. Marking ends when transition is complete.
|
|
|
|
|
|
Protec
All parts will change part no
|
LF suffix at the end of the part no
|
|
|
|
|
|
Pulse
All parts will change part no
|
NL suffix at the end of the part no
|
|
|
|
|
|
RoHS Compliance
PSE Position Statement on Lead-Free Products and ROHS
|
|
|
|
|
|
Sanyo
Discontinued laser diodes: DL-3038-011, DL-3038-033D, DL-3038--041, DL-3038-233, DL-3147-241C-SA, DL-3148-034A, DL-3148-241, DL-4038-011, DL-4038-021C, DL-4038-025, DL-4038-035, DL-5147-041, DL-5147-042, DL-5147-241, DL-5147-242, DL-6147-201
The other laser diodes will bee compliant by June 2006.
Motordriver LB1930-TLM-E leadfree now.
|
|
|
|
|
|
Sic Safco
FELSIC: Compliant
CUBISIC: Compliant
PRORELSIC, Promisic, Relsic, Sical: Compliant
Radial with pins: Compliant, but consuming leaded stock still (June 2005)
RADIAL WITH WIRES: Compliant, but consuming leaded stock still (June 2005)
|
|
|
|
|
|
Xeno
ROHS compatibility document
|
|
|
|
|
|
|
|
Latest news:
|
Stilling ledig, medarbeider batterier.
|
En av våre dyktige batterimedarbeidere har besluttet å gå over i annen stilling og vi søker derfor etter deg som kan videreutvikle hans arbeidsområder. Stillingen er salgsorienter og i samarbeide med våre leverandører og kunder må du kunne håndtere salg og prosjektering av batterier og batteriløsninger til profesjonelt bruk. Du må ha ingeniørbakgrunn og gjerne salgserfaring. Tiltredelse snarest.
Henvendelser til Svein Pettersen svein.pettersen@schive.no
CV og skriftelige søknader til post@schive.no
|
|
|
|
|
Two Popular Pushbuttons Now Sealed
|
The 30 Series is an above-panel mounted SPST momentary contact pushbutton switch with a half-inch diameter actuator in an integral decorative housing. The switches have tactile feedback at the point of contact so that the operator knows that contact has been made. The new versions, 30-2xx, have a threaded housing that adapts to varying panel thicknesses. They are available with a silicone boot that wraps over the top forming a single-surface IP67 seal when compressed against the panel under the rim of the switch.
|
|
|
|
|
Battery Packs for Critical Undersea Applications
|
Electrochem's battery packs power devices that must survive the pounding conditions and extreme temperatures of the ocean, whether for a naval sea-glider or tsunami detection system. In either case, the cost of device failure due to power loss far outweighs the cost of a battery - and Electrochem's solutions are up for the challenge.
|
|
|
|
|
Multifunction graphics meter with 2,8" TFT colour screen
|
The SGD 28-M is a multifunction graphics meter with a 2,8" TFT 320 x 240 pixel colour display and USB programming interface. Using the supplied Windows compatible software package, it is possible to setup the meter, including the type of meter (i.e. 3¾ digit voltmeter, bar graph or analogue style meter), colours and input voltage scaling.
The product will be available during second half of 2010. Contact Vidar on vidar.kristiansen(at)schive.no for details
|
|
|
|
|
Low Cost, Weatherproof Antennas for 2.4 GHz Applications
|
Pulse introduces its new low cost, weatherproof antennas for 2.4 GHz devices used in industrial, smart grid metering, security, broadband access, and other machine-to-machine(M2M) applications. These robust, high-efficiency, compact antennas meet Bluetooth, WLAN, WiFi, IEEE 802.11b/g, ZigBee IEEE 802.15.4, and 2.4 GHz ISM band system standards.
Pulse’s W5001, W5010, and W5011 antennas function in ruggedized conditions, offering IP65 water ingress protection in accordance with international standard IEC 60529, UV protection, and the ability to withstand 100 mph wind loading. They have a maximum gain of 1.5 dBi in the 2,400 to 2,500 MHz range, an efficiency of 70%, and an operating temperature range of -40°C to 85°C. The antennas have a small footprint and low profile, measuring only 128mm x 18mm.
|
|
|
|
|
|
|